Factory Promotional Hydraulic Air Compressor - TR-40 High Pressure Air Dryer Compressed Air Dryer for Compressor – Tianer

Short Description:

Product Detail

Product Tags

Feedback (2)

"Control the standard by the details, show the toughness by quality". Our firm has strived to establish a highly efficient and stable workers workforce and explored an effective high-quality management system for Centrifugal Compressor, 50 Litre Compressor, Spray Machine, Your aid is our everlasting power! Warmly welcome clients in your own home and abroad to go to our enterprise.

Factory Promotional Hydraulic Air Compressor - TR-40 High Pressure Air Dryer Compressed Air Dryer for Compressor – Tianer Detail:

Product Parameter

TR series refrigerated air dryer	TR-40
Max air volume	1500CFM
Power supply	380V / 50HZ (Other power can be customized)
Input power	10.7HP
Air pipe connection	DN100
Evaporator type	Aluminum alloy plate
Refrigerant model	R407C
System max pressure drop	3.625 PSI
Display interface	LED dew point display, LED alarm code display,operation status indication
Intelligent anti-freezing protection	Constant pressure expansion valve and compressor automatic start/stop
Temperature control	Automatic control of condensing temperature/dew point temperature
High voltage protection	Temperature sensor
Low voltage protection	Temperature sensor and inductive intelligent protection
Weight(kg)	550
Dimensions L × W × H（mm)	157511001640
Installation environment:	No sun, no rain, good ventilation, device level hard ground, no dust and fluff

TR Series Condition

1. Ambient temperature: 38℃, Max. 42℃
2. Inlet temperature: 38℃, Max. 65℃
3. Working pressure: 0.7MPa, Max.1.6Mpa
4. Pressure dew point: 2℃~10℃（Air dew point：-23℃~-17℃）
5. No sun, no rain, good ventilation, device level hard ground, no dust and fluff

TR Series Refrigerated Air Dryer

TR series refrigerated Air dryer	Model	TR-15	TR-20	TR-25	TR-30	TR-40	TR-50	TR-60	TR-80
Max. air volume	m³/min	17	23	28	33	42	55	65	85
Power supply		380V/50Hz
Input power	KW	3.7	4.9	5.8	6.1	8	9.2	10.1	12
Air pipe connection		RC2″	RC2-1/2″	DN80		DN100			DN125
Evaporator type		Aluminum alloy plate
Refrigerant model		R407C
System Max. pressure drop	0.025
Intelligent control and protection
Display interface		LED dew point display, LED alarm code display,operation status indication
Intelligent anti-freezing protection		Constant pressure expansion valve and compressor automatic start/stop
Temperature control		Automatic control of condensing temperature/dew point temperature
High voltage protection		Temperature sensor
Low voltage protection		Temperature sensor and inductive intelligent protection
Energy saving:	KG	180	210	350	420	550	680	780	920
Dimension	L	1000	1100	1215	1425	1575	1600	1650	1850
	W	850	900	950	1000	1100	1200	1200	1350
	H	1100	1160	1230	1480	1640	1700	1700	1850

Product Featuer

Compact structure and small size
The plate heat exchanger has a square structure and occupies a small space. It can be flexibly combined with refrigeration components in the equipment without excessive space waste.

The model is flexible and changeable
The plate heat exchanger can be assembled in a modular fashion, that is, it can be combined into the required processing capacity in a 1+1=2 manner, which makes the design of the whole machine flexible and changeable, and can more effectively control the raw material inventory.

High heat exchange efficiency
The flow channel of the plate heat exchanger is small, the plate fins are waveforms, and the cross-section changes are complicated. A small plate can obtain a larger heat exchange area, and the flow direction and flow rate of the fluid are constantly changed, which increases the flow rate of the fluid. Disturbance, so it can reach turbulent flow at a very small flow rate. In the shell-and-tube heat exchanger, the two fluids flow in the tube side and the shell side respectively. Generally, the flow is cross-flow, and the logarithmic average temperature difference correction coefficient is small. ,

There is no dead angle of heat exchange, basically achieving 100% heat exchange
Due to its unique mechanism, the plate heat exchanger makes the heat exchange medium fully contact the plate surface without heat exchange dead angles, no drain holes, and no air leakage. Therefore, compressed air can achieve 100% heat exchange. Ensure the stability of the dew point of the finished product.

Good corrosion resistance
The plate heat exchanger is made of aluminum alloy or stainless steel structure, which has good corrosion resistance and can also avoid secondary pollution of compressed air. Therefore, it can be adapted to various special occasions, including marine ships, with corrosive gases The chemical industry, as well as the more stringent food and pharmaceutical industries.

Product Display

Air Dryer TR-40 (2)
Air Dryer TR-40 (3)
Air Dryer TR-40 (4)
Air Dryer TR-40 (1)

Product detail pictures:

Related Product Guide:

go on to boost, to be certain item quality in line with market and buyer standard demands. Our firm has a excellent assurance procedure happen to be established for Factory Promotional Hydraulic Air Compressor - TR-40 High Pressure Air Dryer Compressed Air Dryer for Compressor – Tianer , The product will supply to all over the world, such as: Czech republic, venezuela, Malaysia, Our products are mainly exported to Southeast Asia, the Middle East, North America and Europe. Our quality is surely guaranteed. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

Air And Filter Dryers