Factory wholesale Air Compressor Dryer - TR-40 High Pressure Air Dryer Compressed Air Dryer for Compressor – Tianer
Factory wholesale Air Compressor Dryer - TR-40 High Pressure Air Dryer Compressed Air Dryer for Compressor – Tianer Detail:
Product Parameter
| TR series refrigerated air dryer | TR-40 | ||||
| Max air volume | 1500CFM | ||||
| Power supply | 380V / 50HZ (Other power can be customized) | ||||
| Input power | 10.7HP | ||||
| Air pipe connection | DN100 | ||||
| Evaporator type | Aluminum alloy plate | ||||
| Refrigerant model | R407C | ||||
| System max pressure drop | 3.625 PSI | ||||
| Display interface | LED dew point display, LED alarm code display,operation status indication | ||||
| Intelligent anti-freezing protection | Constant pressure expansion valve and compressor automatic start/stop | ||||
| Temperature control | Automatic control of condensing temperature/dew point temperature | ||||
| High voltage protection | Temperature sensor | ||||
| Low voltage protection | Temperature sensor and inductive intelligent protection | ||||
| Weight(kg) | 550 | ||||
| Dimensions L × W × H（mm) | 1575*1100*1640 | ||||
| Installation environment: | No sun, no rain, good ventilation, device level hard ground, no dust and fluff | ||||
TR Series Condition
| 1. Ambient temperature: 38℃, Max. 42℃ | |||||
| 2. Inlet temperature: 38℃, Max. 65℃ | |||||
| 3. Working pressure: 0.7MPa, Max.1.6Mpa | |||||
| 4. Pressure dew point: 2℃~10℃（Air dew point：-23℃~-17℃） | |||||
| 5. No sun, no rain, good ventilation, device level hard ground, no dust and fluff |
TR Series Refrigerated Air Dryer
| TR series refrigerated Air dryer |
Model | TR-15 | TR-20 | TR-25 | TR-30 | TR-40 | TR-50 | TR-60 | TR-80 | |
| Max. air volume | m3/min | 17 | 23 | 28 | 33 | 42 | 55 | 65 | 85 | |
| Power supply | 380V/50Hz | |||||||||
| Input power | KW | 3.7 | 4.9 | 5.8 | 6.1 | 8 | 9.2 | 10.1 | 12 | |
| Air pipe connection | RC2″ | RC2-1/2″ | DN80 | DN100 | DN125 | |||||
| Evaporator type | Aluminum alloy plate | |||||||||
| Refrigerant model | R407C | |||||||||
| System Max. pressure drop |
0.025 | |||||||||
| Intelligent control and protection | ||||||||||
| Display interface | LED dew point display, LED alarm code display,operation status indication | |||||||||
| Intelligent anti-freezing protection | Constant pressure expansion valve and compressor automatic start/stop | |||||||||
| Temperature control | Automatic control of condensing temperature/dew point temperature | |||||||||
| High voltage protection | Temperature sensor | |||||||||
| Low voltage protection | Temperature sensor and inductive intelligent protection | |||||||||
| Energy saving: | KG | 180 | 210 | 350 | 420 | 550 | 680 | 780 | 920 | |
| Dimension | L | 1000 | 1100 | 1215 | 1425 | 1575 | 1600 | 1650 | 1850 | |
| W | 850 | 900 | 950 | 1000 | 1100 | 1200 | 1200 | 1350 | ||
| H | 1100 | 1160 | 1230 | 1480 | 1640 | 1700 | 1700 | 1850 | ||
Product Featuer
Compact structure and small size
The plate heat exchanger has a square structure and occupies a small space. It can be flexibly combined with refrigeration components in the equipment without excessive space waste.
The model is flexible and changeable
The plate heat exchanger can be assembled in a modular fashion, that is, it can be combined into the required processing capacity in a 1+1=2 manner, which makes the design of the whole machine flexible and changeable, and can more effectively control the raw material inventory.
High heat exchange efficiency
The flow channel of the plate heat exchanger is small, the plate fins are waveforms, and the cross-section changes are complicated. A small plate can obtain a larger heat exchange area, and the flow direction and flow rate of the fluid are constantly changed, which increases the flow rate of the fluid. Disturbance, so it can reach turbulent flow at a very small flow rate. In the shell-and-tube heat exchanger, the two fluids flow in the tube side and the shell side respectively. Generally, the flow is cross-flow, and the logarithmic average temperature difference correction coefficient is small. ,
There is no dead angle of heat exchange, basically achieving 100% heat exchange
Due to its unique mechanism, the plate heat exchanger makes the heat exchange medium fully contact the plate surface without heat exchange dead angles, no drain holes, and no air leakage. Therefore, compressed air can achieve 100% heat exchange. Ensure the stability of the dew point of the finished product.
Good corrosion resistance
The plate heat exchanger is made of aluminum alloy or stainless steel structure, which has good corrosion resistance and can also avoid secondary pollution of compressed air. Therefore, it can be adapted to various special occasions, including marine ships, with corrosive gases The chemical industry, as well as the more stringent food and pharmaceutical industries.
Product Display
Product detail pictures:
Related Product Guide:
We now have a highly efficient crew to deal with inquiries from clients. Our intention is "100% shopper pleasure by our merchandise quality, price tag & our staff service" and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of Factory wholesale Air Compressor Dryer - TR-40 High Pressure Air Dryer Compressed Air Dryer for Compressor – Tianer , The product will supply to all over the world, such as: Curacao, Rotterdam, Nepal, Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound products with good logistics service and economical cost. Depending on this, our products are sold very well in the countries in Africa, the Mid-East and Southeast Asia.
By Dawn from South Korea - 2017.02.14 13:19
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Rae from Greek - 2018.09.16 11:31
