Welcome to Yancheng Tianer

TR-40 High Pressure Air Dryer Compressed Air Dryer for Compressor

Short Description:

The use of a fully-enclosed compression refrigeration system reduces the temperature of the low-pressure gas and cools it, causing a large amount of saturated water vapor and oil mist contained therein to condense into droplets, which are discharged by an automatic drain after air-water separation.


Product Detail

Product Tags

Product Parameter

TR series refrigerated air dryer TR-40
Max air volume 1500CFM
Power supply 380V / 50HZ (Other power can be customized)
Input power 10.7HP
Air pipe connection DN100
Evaporator type Aluminum alloy plate
Refrigerant  model R407C
System max pressure drop 3.625 PSI
Display interface LED dew point display, LED alarm code display,operation status indication
Intelligent anti-freezing protection Constant pressure expansion valve and compressor automatic start/stop
Temperature control Automatic control of condensing temperature/dew point temperature
High voltage protection Temperature sensor
Low voltage protection Temperature sensor and inductive intelligent protection
Weight(kg) 550
Dimensions L × W × H(mm) 1575*1100*1640
Installation environment: No sun, no rain, good ventilation, device level hard ground, no dust and fluff

TR Series Condition

1. Ambient temperature:  38℃, Max. 42℃
2. Inlet temperature: 38℃, Max. 65℃
3. Working pressure: 0.7MPa, Max.1.6Mpa
4. Pressure dew point: 2℃~10℃(Air dew point:-23℃~-17℃)
5. No sun, no rain, good ventilation, device level hard ground, no dust and fluff

TR Series Refrigerated Air Dryer

TR series refrigerated
Air dryer
Model TR-15 TR-20 TR-25 TR-30 TR-40 TR-50 TR-60 TR-80
Max. air volume m3/min 17 23 28 33 42 55 65 85
Power supply 380V/50Hz
Input power KW 3.7 4.9 5.8 6.1 8 9.2 10.1 12
Air pipe connection RC2" RC2-1/2" DN80 DN100 DN125
Evaporator type Aluminum alloy plate
Refrigerant model R407C
System Max.
pressure drop
0.025
Intelligent control and protection
Display interface LED dew point display, LED alarm code display,operation status indication
Intelligent anti-freezing protection Constant pressure expansion valve and compressor automatic start/stop
Temperature control Automatic control of condensing temperature/dew point temperature
High voltage protection Temperature sensor
Low voltage protection Temperature sensor and inductive intelligent protection
Energy saving: KG 180 210 350 420 550 680 780 920
Dimension L 1000 1100 1215 1425 1575 1600 1650 1850
W 850 900 950 1000 1100 1200 1200 1350
H 1100 1160 1230 1480 1640 1700 1700 1850

Product Featuer

Compact structure and small size
The plate heat exchanger has a square structure and occupies a small space. It can be flexibly combined with refrigeration components in the equipment without excessive space waste.

The model is flexible and changeable
The plate heat exchanger can be assembled in a modular fashion, that is, it can be combined into the required processing capacity in a 1+1=2 manner, which makes the design of the whole machine flexible and changeable, and can more effectively control the raw material inventory.

High heat exchange efficiency
The flow channel of the plate heat exchanger is small, the plate fins are waveforms, and the cross-section changes are complicated. A small plate can obtain a larger heat exchange area, and the flow direction and flow rate of the fluid are constantly changed, which increases the flow rate of the fluid. Disturbance, so it can reach turbulent flow at a very small flow rate. In the shell-and-tube heat exchanger, the two fluids flow in the tube side and the shell side respectively. Generally, the flow is cross-flow, and the logarithmic average temperature difference correction coefficient is small. ,

There is no dead angle of heat exchange, basically achieving 100% heat exchange
Due to its unique mechanism, the plate heat exchanger makes the heat exchange medium fully contact the plate surface without heat exchange dead angles, no drain holes, and no air leakage. Therefore, compressed air can achieve 100% heat exchange. Ensure the stability of the dew point of the finished product.

Good corrosion resistance
The plate heat exchanger is made of aluminum alloy or stainless steel structure, which has good corrosion resistance and can also avoid secondary pollution of compressed air. Therefore, it can be adapted to various special occasions, including marine ships, with corrosive gases The chemical industry, as well as the more stringent food and pharmaceutical industries.

Product Display

Air Dryer TR-40 (2)
Air Dryer TR-40 (3)
Air Dryer TR-40 (4)
Air Dryer TR-40 (1)

  • Previous:
  • Next: